Door Painting in Preston

Interior doors take more daily contact than almost any other painted surface in the home. Panel doors in Preston’s Victorian and Edwardian terraces in Ashton, Ribbleton, and Frenchwood have moulded profiles that collect dirt and old paint layers.

Good preparation determines how long the finish lasts — stripping back loose paint, filling dents and holes, and sanding profiles flush.

We apply oil-based eggshell or water-based satinwood depending on the property and door type. We paint doors in place where possible, or remove them from hinges where the profile or access makes in-situ painting difficult to complete cleanly.

The front door is the first thing a visitor sees. In Preston, original timber front doors on Victorian terraces in Deepdale and Avenham have detailed moulding and raised panels that reward careful preparation and a quality gloss or satinwood finish.

We prepare timber front doors thoroughly: stripping flaking paint back to a firm edge, filling, sanding, and applying a primer coat before any topcoat. Two finish coats of weather-resistant exterior paint are applied and allowed to cure fully between coats.

For full detail on our front door service, see our front door painting page.

French doors and bi-fold doors span the boundary between interior and exterior — both faces need the correct coating for their exposure. The interior face is usually finished in satinwood or eggshell; the exterior face requires a weather-resistant exterior paint.

Timber bi-fold doors in period and modern Preston homes are particularly vulnerable to moisture ingress at frame joints and end grain. We apply penetrating primer to all exposed timber before topcoats, with particular attention to bottom rails and joint areas.

Aluminium-framed bi-fold doors can be painted with specialist metal primers and topcoats where the factory finish has faded or been damaged.

uPVC doors cannot be painted with standard exterior or interior paint — the finish will peel within months regardless of topcoat quality. uPVC requires a specialist adhesion primer, such as Zinsser Bulls Eye 1-2-3 or equivalent, to key into the surface before any topcoat is applied.

Once correctly primed, uPVC doors take a wide range of colours. We use a flexible topcoat system that moves with the uPVC through temperature changes. We paint uPVC front doors, back doors, and conservatory doors across Preston.